Direct Thermal Labels

We start with superior direct thermal, self-adhesive label stock which consists of three layers:

a. Release paper (also referred to as glassine)

• Weight：60 g/m2 ± 10% ISO536
• Thickness 0.053mm ± 10% ISO534

ISO represents “international standardized method.”  The glassine will also have the “Fasson” watermark.  Fasson is owned by Avery Dennison.

b. Permanent adhesive: A general purpose permanent, rubber-based adhesive.  The adhesive features excellent initial tack and ultimate bond on a wide variety of substrates.  It is suitable for applications where compliance with FDA 175.105 is required.  This section covers applications where there is indirect or incidental contact food, cosmetic or drug products.

• Loop Tack (st,st) - FTM 9: 14.0 or Tear
• 20 min 90 Peel (st,st) - FTM 2: 7.0 or Tear
• 24 hour 90 Peel (st,st) - FTM 2: 8.0 or Tear
• Minimum Application Temperature: +10C
• Service Temperature Range: -15C~+60C  

c. Face stock: A smooth white matte paper coated with a black imaging thermo sensitive.  This thermos-sensitive product is designed for weight scale printing and medium to low speed barcode thermal printing.  Exposure to sunshine or temperatures above 50°C should be avoided.  Although the label has a certain degree of moisture resistance, it is not recommended to be used in water immersion or stored in a humid environment for a long time.  This product is not recommended for use in harsh environments where there is possible long-term contact with oil or grease.  Usage not recommended on PVC substrates.  The above does not represent any guarantee or warranty and Buyer must independently determine the suitability of the products for the Buyer’s purposes. For other special applications, testing is always recommended.  This product is suited for all the usual printing technologies.  Because the surface of the heat-sensitive paper has a waterproof barrier layer, ink printing is not recommended.  It is recommended to use raw ink without any additives for processing and printing as much as possible.  Solvent may cause damage to surface coating; care should be taken when using solvent based inks.  Ink testing is always recommended before production.  Excellent conversion characteristics in rotary and flat-bed die-cutting.

• Basis Weight: 72 g/m2 ± 10% ISO536
• Caliper: 0.075 mm ± 10% ISO534
• One year when stored at 23 ± 2°C at 50 ± 5% RH

Other features include:

• Each set of rolls are encased is a protective, orange PVC shrink wrap to protect it from dirt, sunlight and scuffing.
• Labels are produced in a clean environment using the latest technology and undergo numerous quality control checks. Our certifications include ISO 9001:2015.
• All HouseLabels’ products are BPA free.
• The HouseLabels’ team is committed to offering the best possible price for any application. Many e‑commerce & logistics businesses rely on our expertise and customized solutions to meet their business needs.

Bulk Buy Volume Discounts - We built our business on volume, so if you need to place a bulk order, please call us at +84 28 22422482 or email us at [email protected] so we can provide you with an instant quote on volumes greater than what is listed on our website.

BPA

*  BPA (bisphenol A) is an industrial chemical that has been used since the 1960s. Certain thermal paper may contain BPA. The National Toxicology Program at the Department of Health and Human Services says it has "some concern" about the possible health effects of BPA on the brain, behavior and prostate gland of fetuses, infants and children.