Label and Printer Care

Storing Your Labels

HouseLabels direct thermal labels use a special "active" coating known as "direct thermal." Direct thermal is a specialty form of ribbonless technology. It utilizes a heat-sensitive coating that, when brought in contact with a thermal printhead, generates a deep black or in some cases a color image.

HouseLabels takes great care in how it packages its labels. Each set of rolls is shrink-wrapped using orange PVC to protect it from sunlight and dirt . Here are some further guidelines for the caring of your labels:

1. Avoid direct sunlight. Most papers tend to yellow in direct sunlight. Thermal especially so. The printed image also tends to fade when exposed to direct sunlight for extended periods. Thermal paper images also tend to fade when left exposed to conventional fluorescent light for extended periods. To keep the image intact, file as soon as reasonably possible.
2. Avoid hot or humid environments for long-term storage. Although thermal can be used in hot and/or humid environments, it is best to store imaged papers at temperatures lower than 26°C and a relative humidity lower than 65%.
3. Thermal rolls may be stored for the short term at higher temperatures, it is best that for long-term storage the same criteria are used.
4. Thermal coatings begin to activate (develop color and image) in printers between 60°C and 95°C and reach full color density at between 70°C and 115°C. Blanket activation has occurred under extended atmospheric conditions of high temperature or humidity. If thermal papers are to be used continuously, e.g. for more than 24 hours, at temperatures exceeding 40°C, be sure to pay attention to ambient temperature and humidity as well.
5. Avoid contact with plasticizers such as PVC. PVC contains plasticizers such as phthalate to increase flexibility. However, prolonged contact with PVC reduces the image forming ability of the coating and causes printed images to fade.
6. Some thermal papers have wax-type coatings which may contain plasticizers as well. Do not store conventional thermal papers together.
7. Avoid contact with solvents or solvent-type adhesives. If you operate in an environment where solvents, especially organic, or solvent-based adhesives such as acetone, alcohols, ethanol, methyl acetate, turpentine, ketones, esters, etc. are used, be careful in handling thermal media. These substances can cause color formation and damage to image.

Also avoid

1. Body fluids such as sweat can cause the printed image to fade.
2. Friction, scratching, or pressure from fingernails, paper clips, hard plastic or metal objects can cause images to develop obstructing the printed image.
3. Images that face one another can transfer images. Store thermal sheets and tapes with the images away from one another.
4. Direct contact with carbon and carbonless papers. Either can cause thermal images to fade or reduce printability of the roll.

Printer Care

Using HouseLabels’ printhead cleaning cards will improve printer quality and legibility increasing output, machine life, reliability and performance. This pre-saturated, disposable thermal printer cleaning card is designed to safely and effectively remove all dirt, ink, tape, oil, adhesives residue and other contaminates from thermal print heads, paper guides and paper path.

Each card is designed to be fed through printer to clean the thermal print head and is individually wrapped and ready for use so other cards will not dry out prior to use. RECOMMENDED USAGE: Use thermal printer cleaning cards before inserting a new roll of labels or ribbon stock. POS Printers, Label Printers, ID Card Printers, Transfer Printers, Bar Code Printers, ATB Ticket Printers and Direct Thermal Printers.

CAUTION:  Flammable -- contains 99% Isopropyl Alcohol.

Directions 1. Remove from pouch. 2. Insert into feed path, press form feed or manually pull cleaning card through. 3. Discard in trash.